For slicks, choose wheel-to-tire screws designed to help keep the tire from spinning on the rim under drag-racing loads. Allstar Performance’s 35-piece self-tapping set is best for buyers seeking a stated quantity of 1/4-inch screws, while the JEGS kits are better for shoppers who want Grade 8 screws with a choice of gold or silver finish. Moroso is another vehicle-specific option, but its listed features provide fewer installation details. The products below are the four supplied options that match wheel-to-tire or wheel-rim use; steering-wheel, RC-car, and vehicle lug bolts serve different purposes.
| Product | Best for | Key listed detail |
|---|---|---|
| Allstar Performance ALL44045 | A defined 35-piece set | 1/4-inch, self-tapping screws |
| JEGS Gold Kit | Gold-finish preference | Grade 8, #14 x 3/4-inch screws |
| JEGS Silver Kit | Silver-finish preference | Grade 8, #14 x 3/4-inch screws |
| Moroso 90100 | Vehicle-specific shopping | Listed as vehicle specific |
Allstar Performance 1/4-Inch Wheel Rim Screws
Best for: Drag racers who want a self-tapping wheel-rim screw set with a stated piece count. The listing identifies these as 1/4-inch screws, says they are intended to prevent a tire from spinning on the rim, and specifies drag-racing use. One set contains 35 pieces.
This is the clearest choice in the supplied list when quantity and screw diameter are key comparison points. Verify that the screw style and dimensions suit the wheel and tire installation before purchasing. The listed information does not specify the number of screws needed for each wheel, so confirm your intended layout rather than assuming one set covers a particular number of wheels.
JEGS Gold Wheel-to-Tire Screw Kit
Best for: Buyers who want a gold finish and a specified screw size. The kit uses Grade 8 hex-head #14 x 3/4-inch screws with an integral washer face. JEGS says the design allows up to 16 screws per side of each wheel or rim.
The stated screw grade, dimensions, and per-side capacity make this kit easier to compare with another finish option from the same brand. Choose it if the gold finish suits your build and the specified size matches your application. The listing says “up to” 16 screws per side; it does not establish that every wheel requires that number, so determine the appropriate arrangement for your wheel setup.
JEGS Silver Wheel-to-Tire Screw Kit
Best for: Buyers who prefer a silver zinc finish. Like the gold version, this kit has Grade 8 hex-head #14 x 3/4-inch screws with an integral washer face and is designed to add up to 16 screws per side of each wheel or rim.
Choose the silver kit when its finish better matches the wheel or other hardware. Its listed screw specifications are the same as the gold version, making finish the clearest stated difference between the two. Avoid choosing by appearance alone: first confirm the screw dimensions and intended use are suitable for the wheel and tire assembly. The product description does not specify a required screw count for a particular setup.
Moroso 90100 Wheel Rim Screws
Best for: Buyers considering a vehicle-specific wheel-rim screw option. Moroso lists the fit type as vehicle specific. The supplied product details also give package dimensions of 2.29 by 13.21 by 9.53 centimeters and a package weight of 226.8 grams.
This product is relevant to wheel-rim screw shopping, but the available feature list does not state screw diameter, length, material, quantity, or a specific drag-racing application. Check the product listing and compare its fit details with your wheel before selecting it. It is a less straightforward choice than the Allstar and JEGS options if you need clearly stated screw dimensions.
Buying Guide: Choosing Wheel Screws for Slicks
What do wheel-to-tire screws do?
Wheel-to-tire screws are intended to help prevent the tire from rotating on the rim. The Allstar listing explicitly describes that purpose and identifies drag-racing use. Select hardware specifically intended for the wheel-and-tire interface; steering-wheel bolts, RC-car screws, and ordinary vehicle lug bolts are not substitutes.
Which specifications should you compare?
- Diameter and length: Allstar lists a 1/4-inch diameter. JEGS lists #14 x 3/4-inch screws. Check the wheel’s requirements rather than treating these sizes as interchangeable.
- Thread and style: Allstar describes its screws as self-tapping. JEGS specifies a hex head and integral washer face. Confirm the type fits the intended installation.
- Quantity: Allstar supplies 35 pieces. JEGS describes capacity of up to 16 screws per side, but does not state that this is the required count for every setup.
- Fit information: Moroso lists a vehicle-specific fit type, but the supplied details do not identify a vehicle or screw size. Verify exact fitment before ordering.
Does finish matter more than size?
Finish is a personal build preference, while dimensions and fit are functional checks. The JEGS gold and silver kits share the listed Grade 8 material grade, screw dimensions, head style, and washer-face feature. Compare the finish only after confirming the screws suit your application.
How should you narrow the options?
Choose Allstar if a 35-piece, 1/4-inch self-tapping set matches your needs. Compare the JEGS kits if their #14 x 3/4-inch specification fits and you want to select between gold and silver. Consider Moroso only after confirming the vehicle-specific fit and missing dimensions from the listing. If the required screw size or layout is uncertain, consult the wheel manufacturer or a qualified racing shop before installation.
Frequently Asked Questions
Are all wheel screws suitable for slicks?
No. Use screws intended for retaining a tire on a wheel rim. Steering-wheel fasteners, RC-car screws, and lug bolts have different purposes.
Which option lists a 1/4-inch diameter?
The Allstar Performance ALL44045 set is listed as having 1/4-inch self-tapping wheel-rim screws.
Do the JEGS kits have the same listed screw size?
Yes. Both the gold and silver JEGS kits list Grade 8 hex-head #14 x 3/4-inch screws with an integral washer face.
Does “up to 16 screws per side” mean 16 are required?
No. The JEGS description states a capacity of up to 16 per side, not a universal required count. Confirm the appropriate layout for your wheel and tire.
What should I verify before buying?
Check the intended application, screw dimensions and style, wheel fit, and the quantity needed for your setup. Do not rely on finish or a general product name to establish compatibility.