The best skateboard trucks, wheels, and bearings depend on your deck width and riding style. For a standard street setup, the Jizmo 52mm kit bundles trucks, wheels, bearings, and installation parts; the VJ kit offers 99A wheels in 52mm or 54mm; and Jizmo’s 60mm kit is better suited to buyers seeking larger cruiser wheels. The TLHB kit is another complete option, while the Spitfire Cheapshots pack is for replacing bearings rather than building a full setup.
| Product | Best for | Notable details |
|---|---|---|
| Jizmo 52mm Starter Set | Entry-level standard setup | ABEC-9 bearings, tool, pads, and hardware |
| TLHB Starter Kit | Buyers seeking a complete kit | 95A wheels and ABEC-9 bearings |
| VJ Parts Kit | Street and park skating | 52mm or 54mm, 99A wheels |
| Jizmo 60mm Set | Setups with larger cruiser wheels | 60mm wheels, ABEC-9 bearings |
| Spitfire Cheapshots Bearings | Bearing replacement | Eight bearings with ABEC-3 specification |
Jizmo 52mm Skateboard Starter Set
This Jizmo kit is best for someone assembling a standard skateboard around a 7.75- to 8-inch deck. It includes two 139mm trucks, four 52mm wheels, ABEC-9 bearings, a T-tool, 2mm riser pads, and mounting hardware. The aluminum trucks have a 5-inch hanger, 7.6-inch axle, 90A bushings, and six-hole baseplates, according to the product details.
Choose this set if you want the main parts and basic installation accessories in one package. Its 52mm wheels suit buyers looking for a smaller-wheel setup. The listed deck range is limited to 7.75-8 inches, so it may not be the right fit for a wider deck.
TLHB 95A Wheels And Bearings Kit
This TLHB kit is best for buyers seeking a complete parts bundle described as fitting 7.5- to 8-inch decks. The listing highlights aluminum-alloy trucks, 95A wheels, and 608-standard ABEC-9 bearings. It also describes the kit as suitable for beginners and experienced skateboarders.
The 95A wheel hardness is a key comparison point for shoppers choosing a harder wheel. The product listing says the bearings can rotate continuously for 30 seconds without load; that detail is not a guarantee of real-world speed or ride feel. The provided features do not specify the wheel diameter, so confirm the full listing details if wheel size is a deciding factor.
VJ Street And Park Parts Kit
The VJ kit is best for buyers who want a choice of 52mm or 54mm wheels for street, park, ramp, or trick skating. It includes 5.0-inch aluminum trucks, 99A wheels, ABEC-7 bearings, 1-inch mounting hardware, 3mm riser pads, and spacers. The listed trucks have 90A bushings and six-hole baseplates for old-school and new-school mounting patterns.
Choose this kit if wheel hardness and the option to select between two sizes matter more than a higher ABEC number. The product’s listed wheel hardness is 99A, which is harder than the 95A wheels in the TLHB kit. Check the deck width and truck fit before ordering; the kit is listed for 7.5- to 8-inch decks.
Jizmo 60mm Cruiser Wheel Set
This Jizmo set is best for buyers specifically seeking 60mm wheels rather than the 52mm size found in several other kits here. It includes two aluminum trucks, four cruiser wheels, ABEC-9 bearings, a T-tool, 2mm riser pads, and standard hardware. The trucks have a 5-inch hanger, 7.6-inch axle, 90A bushings, and six-hole baseplates.
Choose this option if the larger wheel size matches your planned setup. Because the product features do not state a deck-width range or wheel hardness, check those details on the listing before buying. Do not assume that a kit’s included riser pads guarantee clearance for every deck and wheel combination.
Spitfire Cheapshots Eight-Bearing Pack
This Spitfire Cheapshots pack is best for replacing bearings on a skateboard when trucks and wheels are already in usable condition. The listing identifies the bearings as ABEC-3 and states that the package includes eight bearings, enough for the typical four skateboard wheels.
Choose this product for a bearing-only purchase, not a full setup: it does not include trucks, wheels, or mounting hardware. Its ABEC-3 specification is lower than the ABEC-7 and ABEC-9 ratings listed for the kits above, but an ABEC rating alone does not describe every aspect of a bearing’s suitability for skateboarding.
Buying Guide: How To Choose Trucks, Wheels, And Bearings
What deck and truck width should you match?
Start with the deck width. The product listings give specific deck ranges for the Jizmo 52mm set, TLHB kit, and VJ kit. Compare those stated ranges with your deck before choosing. Truck axle width affects how the wheels sit relative to the deck, so use the manufacturer’s fit information rather than relying only on a product name or wheel size.
Which wheel size and hardness fit your use?
The kits here offer 52mm, 52mm or 54mm, and 60mm wheel options. The listings identify the VJ wheels as 99A and the TLHB wheels as 95A. These figures make product-to-product comparison easier, but the provided details do not establish a single best hardness for every surface or rider. Confirm both diameter and hardness when either is important to your setup.
Do you need a full kit or only replacement parts?
A complete kit can simplify assembly by bundling trucks, wheels, bearings, and some combination of hardware, riser pads, spacers, or a tool. Check exactly what is included: packages differ. If only the bearings need replacement, the Spitfire pack avoids buying a full set of components you may not need.
How should you compare bearing ratings?
ABEC-3, ABEC-7, and ABEC-9 appear across these product listings. Treat those as specifications, not as a complete measure of skateboard performance. Also check the stated bearing type and package quantity. For a full setup, confirm that the kit includes the number of bearings needed for all four wheels.
Frequently Asked Questions
Do skateboard kits include everything needed to assemble a board?
Not always. These kits vary in included tools, riser pads, spacers, and mounting hardware. Review the itemized contents and remember that a deck is not listed as included in these product features.
Are 52mm wheels included in every kit here?
No. Several kits list 52mm wheels, the VJ kit offers 52mm or 54mm, and the Jizmo cruiser set lists 60mm wheels. The Spitfire product is a bearing pack and does not list wheels.
Can I use the Spitfire bearing pack to build a complete skateboard?
No. The pack includes eight bearings only. It does not include trucks, wheels, a deck, or hardware.
Should I choose ABEC-9 over ABEC-7 bearings?
Not based on the rating alone. Compare the complete product details, including fit, package contents, and other specifications, and choose a kit that suits the rest of your setup.