The best travel trailer power stabilizer jacks depend on whether you need a replacement electric system or a faster way to operate manual jacks. The MFZDQL and Orvex kits are replacement-style options for a 298707 system, while the BAL Powered C-Jack offers a 12-volt powered stabilizer. HRepair is a switch-equipped electric system, and the LIBRA four-pack suits buyers who prefer heavy-duty scissor jacks with drill-assisted operation. Check your trailer’s mounting and electrical requirements before choosing.
| Product | Best For | Operation |
|---|---|---|
| MFZDQL 298707 Replacement Kit | Replacement with stated capacity and lift details | Electric switch |
| Orvex 298707 Replacement Kit | Electric replacement with steel construction | Electric switch |
| BAL Powered C-Jack | Buyers seeking a 12-volt powered jack | Push-button power |
| HRepair Rear Power Stabilizer | Buyers needing a waterproof switch kit | Electric switch |
| LIBRA 9K Scissor Jacks, Set of 4 | Heavy-duty manual jacks with drill-ready setup | Power-drill socket |
MFZDQL 298707 Power Stabilizer Replacement
The MFZDQL kit is best for trailer owners seeking a powered replacement for a 298707 stabilizer assembly. Its exterior switch eliminates hand cranking, and the listing specifies a maximum lift height of 30 inches and a 2,000-pound capacity. Each leg operates independently to adapt to uneven terrain.
The assembly is described as heavy-duty steel with a black powder-coated finish. The product listing also notes an emergency short-circuit device and an improved braking system. Its stated dimensions are 79 inches long, 6.2 inches wide, and 19 inches high, with a listed weight of 58 pounds.
Choose this if the 298707 replacement format, dimensions, and stated capacity match your installation. Limitation: confirm fit and wiring details before ordering; the listing does not establish compatibility with every trailer.
Orvex 298707 Electric Stabilizer Kit
The Orvex kit is another replacement-style choice for buyers looking for an electric 298707 stabilizer. It replaces manual cranking with switch operation and lists a maximum lift height of 30 inches. The product description says each leg works independently and can adapt to uneven ground.
Its stated construction is heavy-duty steel with a black powder-coated finish. Orvex also describes an emergency short-circuit device and braking system intended to address circuit overload. The listing says each unit is tested before shipment.
Best for: shoppers who want a switch-operated replacement with the listed 30-inch lift and steel construction. Limitation: the provided product details do not state a capacity or overall dimensions, so verify these against your trailer’s requirements.
BAL 12-Volt Powered C-Jack
The BAL Powered C-Jack is best for buyers who want a powered stabilizer using a 12-volt motor. The listing describes nearly automatic stabilizing at the touch of a button and identifies the product as a 25-inch electric stabilizer jack for RVs and trailers.
This is a different style of option from a complete four-jack manual set: the product title describes a bolt-on mount, and the listed feature mentions a replacement motor for a scissor-jack power pack. Check the exact parts included and mounting arrangement before purchase.
Choose this if a 12-volt powered C-jack suits your setup. Limitation: the available feature details do not provide a load capacity or a full installation specification.
HRepair Rear Power Stabilizer System
The HRepair system is best for buyers looking for an electric stabilizer kit that includes a switch described as waterproof. Its listing presents the jacks as electric-powered, with a switch kit for raising and lowering them. The switch cover is intended to help protect the control from moisture.
The listing describes the jacks as suitable for installation at trailer corners or other appropriate locations. Because placement depends on the trailer and installation, buyers should confirm mounting points and electrical requirements before choosing this system.
Better for: shoppers who prioritize a moisture-protected switch as part of the kit. Limitation: the supplied details do not specify capacity, lift height, dimensions, or a precise vehicle-fit list.
LIBRA 9K Heavy-Duty Scissor Jacks
The LIBRA four-pack is best for buyers who want heavy-duty scissor jacks rather than an integrated electric system. The listing gives a 9,000-pound capacity, 24-inch height, and thick 11-gauge steel construction with an electrophoresis coating. A 3/4-inch hex magnetic socket is included for power-drill operation.
The set also includes mounting screws, a socket, a drill bit, and a drilling guide sticker. These accessories can help with installation and quicker operation, but the jacks are not described as electrically powered stabilizers.
Choose this if you prefer a four-jack mechanical setup with drill assistance and a stated capacity. Limitation: the power drill is the operating aid; this is not a switch-operated electric jack system.
Buying Guide: How to Choose Travel Trailer Power Stabilizer Jacks
Do you need an electric replacement or a complete jack set?
Start by identifying what is already installed. MFZDQL and Orvex are presented as replacement kits for a 298707 system. BAL is a powered C-jack option, while HRepair is an electric system with a waterproof switch. LIBRA is a set of mechanical scissor jacks that can be operated with a drill. These product types are not automatically interchangeable.
What capacity and lift height should you check?
Compare the product’s stated capacity and lift range with your trailer’s requirements and the intended stabilizing points. MFZDQL lists a 2,000-pound capacity and 30-inch maximum lift; Orvex lists 30 inches but does not provide a capacity in the supplied details. LIBRA lists 9,000 pounds and 24 inches. Do not treat stabilizer capacity as a substitute for a trailer’s weight-support or leveling requirements.
Which operating method fits your campsite routine?
Electric switches reduce manual cranking but require an appropriate electrical setup. Drill-assisted scissor jacks can speed up manual operation, but the drill is separate unless specified. Consider whether you prefer a permanently installed powered system or a mechanical set that can be operated by hand or tool.
What should you confirm before ordering?
- Replacement part number, mounting style, and available space.
- Electrical supply and switch location for powered models.
- Capacity, lift height, and dimensions where provided.
- Whether installation hardware or a drill socket is included.
Frequently Asked Questions
Are travel trailer power stabilizer jacks used for leveling?
They are intended to stabilize a parked trailer. Check the product and trailer instructions for leveling; do not assume stabilizer jacks are designed to lift or support the entire trailer.
Can a power stabilizer replace a manual jack?
Some electric kits are described as replacements for specific stabilizer systems, but fit depends on the part number, mounting arrangement, and wiring. Verify those details before buying.
Do all electric stabilizer jacks use a 12-volt motor?
No. The BAL listing specifically identifies a 12-volt motor. The supplied details for other products do not state the same electrical specification.
Can a power drill operate electric stabilizer jacks?
A drill can operate compatible mechanical scissor jacks when the correct socket or adapter is used. It does not replace the electric controls on a powered jack system.