For a 35-hp PTO shaft, match the shaft’s end fittings, operating length, speed, and torque rating to your tractor and implement before buying. The options below include 1-3/8-inch shafts rated for 35 hp at 540 rpm, with either two 6-spline ends or a round implement end. Product listings identify these models as Series 4 or by their dimensions—not as Series 35—so confirm the required series with your equipment manufacturer.
| Product | End Fittings | Length Range | Best For |
|---|---|---|---|
| VEVOR Series 4 | 6-spline to 6-spline | 31.5–41 inches | Shorter shaft setups |
| SCITOO Yellow | 6-spline to 6-spline | 39–62.5 inches | Adjustable reach with matching ends |
| SCITOO Yellow Round-End | 6-spline to round | 39–63 inches | Implements with a round input |
| ACZCR Yellow | 6-spline to 6-spline | 37–59 inches | Shorter operating length range |
| ACZCR Yellow | 6-spline to round | 39–63 inches | Longer reach with a round implement end |
VEVOR Series 4 PTO Shaft
This VEVOR Series 4 shaft has 1-3/8-inch, 6-spline connections at both ends. Its compressed length is 31.5 inches, and its extended overall length is 41 inches. The listing gives a capacity of 35 hp and 460 Nm at 540 rpm, making it the closest listed option for a buyer seeking a 35-hp PTO shaft with a shorter working span.
Best for: Tractor and implement combinations that use matching 6-spline fittings and need a relatively compact shaft. The listed construction includes a slip clutch, carburized steel universal joint, and Q345 steel tube inside the shield. Check first: Its length range is shorter than the other featured models, so avoid it if your measured setup requires more reach.
SCITOO Yellow 39–62.5-Inch Shaft
This SCITOO driveline has 1-3/8-inch, 6-spline ends on both the tractor and implement sides. It compresses to 39 inches and extends to 62.5 inches; the manufacturer recommends a 47-inch length for use. Its stated rating is 35 hp and 460 Nm at 540 rpm, with a 55-hp rating at 1000 rpm.
Best for: Buyers who need a longer adjustment range and identical spline-style connections at both ends. The listed construction includes telescoping steel tubes, universal joints, yokes, and a Q345 steel tube inside the shield. Check first: Do not choose this version if the implement requires a round input end.
SCITOO Yellow Round-End PTO Shaft
This SCITOO model pairs a 1-3/8-inch, 6-spline tractor end with a 1-3/8-inch round implement end. Its listed length adjusts from 39 to 63 inches. Rated figures are 35 hp and 460 Nm at 540 rpm, plus 55 hp and 380 Nm at 1000 rpm.
Best for: Buyers whose tractor uses a 6-spline PTO connection but whose implement has a round input. The telescoping tube, universal joint, and yokes support length adjustment. Check first: The round implement end is not interchangeable with a 6-spline implement connection; verify the implement’s input type before ordering.
ACZCR Yellow 37–59-Inch PTO Shaft
The ACZCR shaft has 1-3/8-inch, 6-spline connections at both ends. It compresses to 37 inches and extends to 59 inches. The listing specifies 35 hp and 460 Nm at 540 rpm, as well as 55 hp and 380 Nm at 1000 rpm.
Best for: Buyers who need a two-spline-end shaft with a shorter minimum length than the 39-inch options. The product description highlights direct replacement and assembly. Check first: Its maximum listed length is 59 inches, so measure the required operating range and ensure it is sufficient for the tractor-implement arrangement.
ACZCR Yellow 39–63-Inch Round-End Shaft
This ACZCR option uses a 1-3/8-inch, 6-spline tractor end and a round implement end. Its compressed length is 39 inches, with an extended length of 63 inches. The listed capacity is 35 hp and 460 Nm at 540 rpm, with 55 hp and 380 Nm at 1000 rpm.
Best for: Buyers needing a longer shaft with a round implement connection. Its length and end style distinguish it from the ACZCR model above. Check first: The product description does not specify a recommended operating length, so confirm the required minimum and maximum dimensions with the equipment documentation.
Buying Guide: How To Choose A 35-Hp PTO Shaft
What does “Series 35” mean for this search?
“Series 35” may refer to a driveline series designation rather than a 35-hp rating. The listed products describe Series 4 models or provide horsepower figures; they do not identify themselves as Series 35. Confirm the series, shaft profile, and required power rating in your tractor and implement manuals rather than treating the horsepower number as a series designation.
Which end fittings should I match?
Check both connections separately. A 1-3/8-inch, 6-spline tractor end does not establish that the implement end is also splined. Choose a two-spline-end model only when both machine inputs match; select a round-end model when the implement requires a round input. Compare diameter and connection details with the equipment specifications.
How should I check shaft length?
Measure the distance between the tractor PTO and implement input in the working position, then account for the full range of movement during operation. Compare that measurement with the shaft’s compressed and extended lengths. A shaft must not bottom out when compressed or separate when extended. Follow the equipment and driveline manufacturer’s installation and trimming instructions.
Do rpm and torque ratings matter?
Yes. Compare the shaft’s stated horsepower, torque, and speed ratings with the tractor PTO and implement requirements. The featured options list different figures at 540 and 1000 rpm. Do not assume that a 35-hp rating alone confirms suitability for every operating speed or application.
Frequently Asked Questions
Is a 35-hp PTO shaft the same as a Series 35 shaft?
No. Horsepower describes a power rating, while “Series 35” can refer to a driveline series. Verify both the series designation and capacity in the equipment documentation.
Can I use a round-end shaft on a splined implement?
Only if the implement is designed for that connection. Match the implement input type exactly; a round end and a splined end are different fittings.
Which featured shaft has the shortest compressed length?
The VEVOR Series 4 model has the shortest listed compressed length at 31.5 inches. Confirm that its 41-inch maximum length also fits your setup.
Are these shafts suitable for 540-rpm operation?
Each featured product lists a 540-rpm rating. Check the specific horsepower and torque limits against the implement and tractor requirements before use.