The best RV trailer tongue jack stand depends on your jack’s shape, the support capacity you need, and how much added height is useful. The Camco 5,000-pound stand is a straightforward option for broad load distribution, while Andersen Hitches suits buyers who want a magnetically positioned block. OULEME offers a higher stated capacity and broad fit, Valterra is a lightweight choice for lower tongue-weight needs, and OX BLOX is a stackable option rated for use on varied surfaces.
| Product | Best For | Listed Rating |
|---|---|---|
| Camco 44635 | Simple tongue jack support | 5,000 lb. |
| Andersen Hitches 3608 | Magnetic positioning | 8,000 lb. single stacked |
| OULEME 15,000 lb. block | Versatile jack and foot fit | 15,000 lb. |
| Valterra A10-0900 | Lightweight support | 500 lb. tongue weight |
| OX BLOX | Stackable support on varied surfaces | 10,000 lb. per block |
Camco 44635: Best Straightforward Tongue Stand
The Camco 44635 is a dedicated tongue jack stand with a 5,000-pound weight rating. Its 8-inch height and 2 1/16-inch recessed dock provide a defined seating area for the jack. The broad base is designed to distribute tongue weight, and the lightweight stand offers an alternative to bulky wood or cinderblocks.
Best for: RV owners seeking a simple, purpose-built stand with a stated 5,000-pound rating. It was selected for its direct tongue-jack use and clear dimensions. Limitation: Its recessed dock is sized at 2 1/16 inches, so check the jack’s contact area before choosing it.
Andersen Hitches 3608: Best Magnetic Positioning
This 8-inch-tall block has a 12-inch-diameter base and a built-in magnet that holds it against a round jack pad while the jack is lowered. The manufacturer lists a capacity of up to 8,000 pounds when single stacked and 1,500 pounds when double stacked. Its wide base is designed to distribute load and resist tipping on soft or uneven ground.
Best for: Buyers who want a block that stays positioned against a compatible round jack pad during setup. It is a useful choice when placement convenience matters. Limitation: The listed capacity changes substantially when double stacked; follow the rating for the exact configuration.
OULEME 15,000-Pound Block: Best for Versatile Fit
OULEME lists this block at 15,000 pounds per block and describes it as compatible with square and round jack feet up to 9 inches, a 2-inch tongue jack post, a 6-by-2-inch tongue jack wheel, and scissor stabilizers. The block measures 4.85 inches tall, with a 10-by-10-inch bottom and an 8.5-by-8.5-inch top. Two blocks stack to a listed height of 8.2 inches.
Best for: Owners who want one block for several jack or stabilizer styles. Its fit range and listed capacity make it a flexible option. Limitation: The double-stacked height is only 8.2 inches; check whether that meets the height needed for your setup.
Valterra A10-0900: Best Lightweight Option
The Valterra stand weighs 2 pounds and is designed to support a trailer tongue without sinking into asphalt on hot days. Its listed gross tongue weight capacity is 500 pounds, and its gross trailer weight capacity is 5,000 pounds. The lightweight construction can also reduce the storage burden compared with carrying bulky wood blocks.
Best for: Buyers who prioritize a light, compact stand and whose tongue weight falls within the stated 500-pound limit. It was selected for its portability and specific hot-asphalt use. Limitation: Its tongue-weight rating is lower than the other high-capacity blocks in this comparison; verify your load before use.
OX BLOX: Best Stackable Support
OX BLOX is rated for up to 10,000 pounds per block and is described for tongue, post, foot, scissor, and stabilizer jacks, including round and square styles. The blocks can be stacked for added height, with the listed 10,000-pound rating applying when stacked as well. The product is designed for gravel, grass, dirt, and pavement.
Best for: Buyers who need a stackable block for different jack styles or surfaces. It was selected for its stated per-block capacity and broad described use. Limitation: The product details do not give block dimensions, so confirm that its footprint and height suit your storage space and jack setup.
Buying Guide: How to Choose an RV Tongue Jack Stand
What capacity should you look for?
Compare the stand’s stated rating with the load it will support, and distinguish tongue-weight capacity from gross trailer weight capacity. Those figures describe different measurements. For example, Valterra lists a 500-pound gross tongue weight capacity and a 5,000-pound gross trailer weight capacity. Do not treat them as interchangeable or assume a block’s rating automatically represents your trailer’s tongue weight.
Will it fit your jack?
Check whether the product is intended for a tongue jack post, wheel, round foot, square foot, or stabilizer. A recessed dock or magnet can help with positioning only when the jack’s contact surface matches the product design. Blocks listing several supported shapes may be more flexible, but measure your jack’s footprint and compare it with the listed dimensions.
How much height and base area do you need?
Compare the stand’s height with the clearance required at your campsite. A taller block can reduce the amount of jack extension needed, while a wider base can provide a larger support footprint. If stacking is part of the plan, check the stated stacked height and the capacity for that configuration; ratings may differ between single and double stacking.
Where will you park and store it?
Consider the ground surface, expected weather exposure, and storage space. Some products specifically describe use on soft or uneven ground, gravel, grass, or hot asphalt. Weight also matters if you regularly move equipment between vehicles or have limited storage. Choose a stand that fits the intended terrain and can be transported conveniently.
Frequently Asked Questions
Is a tongue jack stand the same as a leveling block?
Not necessarily. A tongue jack stand supports the tongue jack, while leveling blocks are generally used to adjust a trailer’s position. Some products are described for both support and leveling uses, so check the manufacturer’s stated applications.
Can I stack trailer jack blocks?
Only stack blocks when the product is designed for stacking, and follow its stated stacked capacity and height. The listed rating may change when blocks are stacked.
Does a higher weight rating mean a stand fits every jack?
No. Capacity and fit are separate considerations. Confirm the jack shape and dimensions match the stand, even when the stand’s listed capacity is high.
Should I use wood instead of a jack stand?
These products are presented as alternatives to bulky wood or other improvised supports. Choose a purpose-built stand when its fit and capacity meet your needs, and follow the product instructions for setup.