The best match depends on whether you need a full-size truck wheel, replacement wheels and tires for an RC truck, or miniature rims for a collectible. The XD XD778 is the full-size wheel option listed here; INJORA and HIRCQOO are RC wheel-and-tire sets. The Monster Jam models are small die-cast collectibles, not parts for road vehicles or RC trucks.
| Product | Best for | Key detail |
|---|---|---|
| XD XD778 | Full-size truck wheel shoppers | 18×9, listed 6-lug patterns, -12 mm offset |
| HIRCQOO tires and rims | 1/10-scale RC owners | 120 mm tires and 12 mm hex |
| INJORA tires and wheels | 1/18- or 1/24-scale RC crawlers | 70 x 38 mm tires |
| Grave Digger 1:24 | Monster Jam collectors | Chrome rims and BKT-tread tires |
| El Toro Loco Classic 1:64 | Small-scale play and collecting | Chrome rims; fits 1:64 playsets |
XD XD778 18-Inch Truck Wheel
The XD XD778 is the clearest choice in this list for a full-size truck wheel. The listing identifies an 18-by-9-inch rim, black finish, -12 mm offset, and two listed six-lug bolt patterns: 6×135 and 6×139.7. It also gives replacement center-cap part number 846L215B or ASIN B0052DVSTM.
Best for: Buyers whose vehicle requirements match the listed wheel dimensions and bolt pattern. It was selected because it is the only full-size wheel in the product list. Verify the vehicle’s bolt pattern, wheel width, offset, and other fitment requirements before purchasing. The provided product details do not identify specific compatible vehicle models.
Limitation: The listing’s center-cap information does not establish that the wheel fits a particular truck.
HIRCQOO 1/10 RC Truck Tires And Rims
This HIRCQOO set is an RC wheel-and-tire option, not a full-size truck rim. The listed dimensions are 120 mm (4.72 inches) outer diameter and 56 mm (2.20 inches) tire width, with a 12 mm hex and 4 mm axle hole. The product description names several 1/10-scale off-road models as applications, including Traxxas Stampede 2WD, Redcat Volcano, and Tamiya Blackfoot.
Best for: RC owners who need the listed size and 12 mm hex arrangement and have confirmed their model’s fitment. It was selected for its specific measurements and named RC applications.
Limitation: The tires are not pre-glued to the rims. The listing says glue is required before running them; check size and fit before buying.
INJORA 70 x 38 mm RC Tires
INJORA’s monster truck tires are listed for 1/18- and 1/24-scale RC crawlers. They measure 70 by 38 mm and use an M1 compound, with a plastic rim inside. The product description highlights a deep-grooved tread pattern intended for dirt or carpet and a wider tire profile.
Best for: Owners of a smaller RC crawler who have checked that the tire dimensions and wheel setup suit their model. The deep grooves make this a distinct option for shoppers prioritizing an aggressive tread appearance and stated traction use.
Limitation: The listing does not provide a specific model-by-model compatibility list or a hex size, so confirm those details before ordering.
Monster Jam Grave Digger 1:24
This Grave Digger is a 1:24-scale die-cast collectible rather than a replacement rim or full-size truck wheel. Its features include black-and-green graphics, chrome rims, and BKT-tread tires. The listing says it works with Monster Jam 1:24 playsets, ramps, and tracks.
Best for: Monster Jam fans seeking a larger display or playset vehicle with visible rim details. It was chosen as a clearly labeled miniature option for readers using “monster truck rims” to find toy collectibles.
Limitation: Its scale and playset compatibility make it unsuitable as a vehicle or RC wheel replacement.
El Toro Loco Classic 1:64
El Toro Loco Classic is a compact 1:64-scale die-cast Monster Jam vehicle. It has chrome rims and BKT-tread tires, and the listing states compatibility with Monster Jam 1:64 tracks, arenas, and playsets.
Best for: Collectors or families looking for a small-scale Monster Jam truck with detailed wheel styling. Choose this over the 1:24 Grave Digger if a pocket-size collectible or 1:64 playset vehicle is the priority.
Limitation: This is a miniature toy, not an aftermarket truck rim or RC wheel component.
Buying Guide: How To Choose Monster Truck Rims
Do you need full-size wheels or miniature wheels?
Start by identifying the vehicle type. The XD XD778 is the only full-size wheel listed. HIRCQOO and INJORA are RC products, while Grave Digger and El Toro Loco are die-cast toys. These categories are not interchangeable, even when each listing uses monster-truck styling.
Which fitment measurements should you verify?
For the XD wheel, compare the listed 18×9 size, -12 mm offset, and 6×135 or 6×139.7 bolt pattern with your vehicle’s requirements. For RC wheels, check scale, tire diameter and width, hex size, and axle opening where supplied. Do not rely on appearance alone to determine fit.
Should you choose an assembled RC wheel-and-tire set?
Check whether the tires arrive attached to the rims. HIRCQOO specifically states that its tires are not pre-glued and require gluing before use. INJORA lists plastic rims inside the tires, but the supplied details do not give a model-specific fitment chart.
Does tread or rim styling matter more?
For RC use, compare stated dimensions and tread design first; INJORA describes deep grooves for dirt or carpet. For collectibles, rim details are primarily part of the miniature’s appearance. The Monster Jam items list chrome rims and BKT-style tread details, but they are not functional replacements for vehicle wheels.
Frequently Asked Questions
Which product here is a full-size truck wheel?
The XD XD778 is the full-size wheel option. Its listing gives an 18×9 size, -12 mm offset, and 6×135 and 6×139.7 bolt patterns.
Are the Monster Jam models replacement rims?
No. Grave Digger and El Toro Loco are die-cast toys with decorative wheel details. They are not full-size or RC replacement parts.
What size are the HIRCQOO RC tires?
The listing gives an outer diameter of 120 mm (4.72 inches), a width of 56 mm (2.20 inches), a 12 mm wheel-drive hex, and a 4 mm axle hole.
Do the HIRCQOO tires come glued to the rims?
No. The product details say they are not pre-glued and need to be glued together before use.
What RC scale is listed for the INJORA tires?
INJORA lists these 70 x 38 mm tires for 1/18- and 1/24-scale RC crawlers.