The best long stroke hydraulic jack depends on its rated capacity, lift range, and mounting style. For engine hoists and shop cranes, the VEVOR 8-ton air-pump model suits buyers seeking air-assisted operation, while the VEVOR 4-ton model offers a lower-capacity option. The NEWTRY 10-ton ram is a compact, short-stroke choice for users with a compatible pump. Compare the listed measurements and connection details with your equipment before choosing.
| Product | Best For | Key Detail |
|---|---|---|
| VEVOR 8-Ton Air-Pump Long Ram | Hoist users wanting air-assisted operation | 26–46.5-inch lifting range |
| VEVOR 4-Ton Long Ram | Medium-capacity engine lifting | 24–43.7-inch range; 19.7-inch stroke |
| SUNEX TOOLS 5081B | Engine cranes and industrial equipment | Long-stroke design; ductile iron base |
| NEWTRY 10T Hydraulic Ram | Compatible porta-power pump setups | 10-ton rating; 4-inch stroke |
| BIG RED 3-Ton Long Ram | Lower-capacity hoists and cranes | 24-3/8–43-7/8-inch lifting range |
VEVOR 8-Ton Air-Pump Long Ram
This model is best for garage or shop users who want an 8-ton engine-hoist cylinder with an air-pump feature. Its listed lifting range is 26 to 46.5 inches, giving it a 20.5-inch difference between minimum and maximum height. The product also lists a dual-piston pump, a rubber-grip handle, a #45 steel body, and a hard-chrome-treated pump core.
Choose it if the air-pump feature and stated range match your hoist setup. Its listed range differs from several manual VEVOR models, so confirm the required height and mounting fit. The product data does not specify an exact stroke length.
VEVOR 4-Ton Long Ram Jack
The VEVOR 4-ton model is best for buyers whose lifting needs fall below the capacity of an 8-ton ram. It is rated for 8,818 pounds and has a listed lifting range of 24 to 43.7 inches, with a 19.7-inch stroke. Its single-piston pump, flat base, large-diameter hydraulic cylinder, and Y-type polyurethane seals are among its stated features.
Its slow-release feature may suit users who need controlled lowering. Choose this model only when the load is within its rated capacity and the flat base suits the equipment. It has less rated capacity than the 8-ton alternatives.
SUNEX TOOLS 5081B Long-Stroke Jack
This Sunex jack is best for buyers comparing equipment for farm applications, engine cranes, manufacturing, or material-handling equipment. Its description identifies it as an 8-ton long-stroke bottle jack and lists a ductile iron base. The product information also mentions a RapidRise system and pivoting base on the RS5218AHR model; those features should not be assumed to apply to the 5081B.
Choose it when a bottle-jack format and the stated application fit your setup. The supplied details do not give a lifting range or stroke measurement for this specific model, so verify those dimensions before ordering.
NEWTRY 10-Ton Hydraulic Ram
The NEWTRY ram is best for buyers who need a 10-ton-rated hydraulic cylinder for a compatible porta-power arrangement. It has a 4-inch stroke, a 6.14-inch self-height, a 3/8-inch male connector, and a listed compatible pump model, CP-180. The product description also lists a dust-resistant cover and a lacquered surface.
This is a compact ram rather than a tall engine-hoist cylinder with a roughly 20-inch stroke. Choose it if its connection and 4-inch travel match your equipment. Avoid assuming it will fit a crane or hoist without checking the connector and mounting requirements.
BIG RED 3-Ton Long Ram Jack
The BIG RED is best for users with a lower-capacity garage or shop crane. It is rated for 3 tons, or 6,000 pounds, and lists a lifting range of 24-3/8 to 43-7/8 inches. Its single-piston pump and clevis-style base are designed for use with garage and shop cranes, engine hoists, and similar equipment. The description also specifies heavy-duty steel and a heat-treated chrome cylinder.
Choose it if its capacity and clevis base match your equipment. Its 3-ton rating is lower than the 4-ton and 8-ton options, so it is not the right pick when the planned load exceeds that limit.
Buying Guide: How To Choose A Long Stroke Hydraulic Jack
What capacity should you look for?
Start with the load the jack must raise, then compare it with the stated capacity. The products here range from 3 to 10 tons, but a higher rating alone does not confirm that a jack fits your hoist. Check the equipment maker’s load limits and follow safe lifting procedures. Never use a jack to support a load unless the complete setup is designed for that purpose.
How much lift range or stroke do you need?
Lift range describes the listed minimum and maximum heights, while stroke refers to how far the ram extends. These figures are not interchangeable. The VEVOR 4-ton model lists a 19.7-inch stroke, while the NEWTRY ram lists only 4 inches. Measure the space and travel required for your task, then compare the product’s stated dimensions.
Which mounting style and pump matter?
Check whether your equipment requires a clevis base, flat base, or another mounting arrangement. Also distinguish a manual-pump hoist jack from a ram intended to connect to a separate hydraulic pump. For the NEWTRY model, the listed connector and CP-180 pump reference are important fit details. Do not assume similar-looking cylinders are interchangeable.
Is slow release or air assistance important?
The VEVOR 8-ton air-pump option is relevant if air-assisted operation is a priority. The VEVOR manual long-ram listing describes a slow-release function, as does the 4-ton model. These features do not replace correct load control, secure positioning, or the operating instructions for the jack and hoist.
Frequently Asked Questions
What is a long ram hydraulic jack used for?
A long ram jack is commonly used in equipment such as engine hoists, shop cranes, and some farm or industrial applications. Confirm that its capacity, height, and mounting style suit the equipment.
Does a higher ton rating mean a longer stroke?
No. Capacity and stroke measure different things. The NEWTRY ram is rated for 10 tons but lists a 4-inch stroke, while the VEVOR 4-ton model lists a 19.7-inch stroke.
Can any long ram jack fit an engine hoist?
No. Base style, dimensions, travel, and connection type can vary. Compare the jack’s specifications with the hoist’s requirements before purchase.
What is the difference between stroke and lifting range?
Stroke is the ram’s extension distance. Lifting range describes the stated low and high positions. Check both where the product listing provides them.
Should I choose a manual or air-pump jack?
Choose based on the operating method your workspace and equipment support. The VEVOR 8-ton air-pump model lists air-pump operation, while several other options specify manual pumping. Verify setup requirements before buying.