The best hitch for a dump truck depends on its frame, body style, and trailer connection. Flatbed dump trucks can use a hitch plate bumper with a receiver, while Chevy/GMC and Ram chassis may need a vehicle-specific pintle hitch plate. The options below include two flatbed designs, two truck-specific plates, and an adjustable receiver hitch for buyers who already have a compatible receiver.
| Product | Best For | Listed Capacity |
|---|---|---|
| Buyers Products 1809055 | Flatbed dump trucks needing a 2-inch receiver | 17,000 lb MGTW |
| Buyers Products 1809035A | Chevy/GMC 3500 pintle mounting | 20,000 lb MGTW |
| Buyers Products 1809079 | Ram 3500–5500 pintle mounting | 20,000 lb MGTW |
| Buyers Products 1809070 | Flatbed trucks needing a 2-1/2-inch receiver | 20,000 lb MGTW |
| GWTAUTO Adjustable Hitch | Multiple ball sizes and a hook | 17,000 lb GTW |
Buyers Products 1809055 Flatbed Hitch Plate
This hitch plate bumper is designed for flatbed and flatbed dump trucks with longer rear overhangs. It has a 2-inch receiver, pintle hook mounting capability, and a listed maximum gross trailer weight (MGTW) of 17,000 pounds. The product is also described as maintaining ICC bumper protection.
Best for: Contractors or fleet operators who need both receiver and pintle mounting options on a flatbed truck. Its ready-to-install design is intended for cab-and-chassis trucks with a nominal 34-inch frame width and can be bolted and welded.
Check before buying: Some drilling may be required on GM or Ram trucks. Confirm frame dimensions and mounting requirements before ordering.
Buyers Products 1809035A Chevy/GMC Hitch Plate
This pintle mount hitch plate is listed for Chevy/GMC 3500 trucks and has a 20,000-pound MGTW rating. Its specifications include a 1/2-inch-by-15.5-inch plate and a side-channel position. The black powder-coated finish is described as corrosion-resistant.
Best for: Buyers with a compatible Chevy/GMC 3500 who need a dedicated pintle mount rather than a flatbed bumper with a receiver. The product is described as ready to use with little or no fabrication.
Check before buying: The listed fitment is specific to Chevy/GMC 3500. Verify the truck configuration and hitch mounting location; the product details do not establish fitment for other models.
Buyers Products 1809079 Ram Hitch Plate
This hitch plate with pintle mount is listed for Ram 3500–5500 trucks. It has a bottom-channel position and a stated 20,000-pound MGTW rating. The product information says it is ready to use with little or no fabrication.
Best for: Ram owners looking for a vehicle-specific pintle mounting plate for a heavy-duty towing setup. Its listed model range and channel position make it a more targeted choice than a universal receiver accessory.
Check before buying: The supplied feature information is limited. Confirm the exact Ram model, frame setup, and installation requirements with the product listing or manufacturer before purchase.
Buyers Products 1809070 Flatbed Hitch Plate
This hitch plate bumper is made for flatbeds and flatbed dump trucks. It has a 2-1/2-inch receiver, a listed 20,000-pound MGTW rating, and a corrosion-resistant powder coating. Its stated application is cab-and-chassis trucks with a nominal 34-inch frame width.
Best for: Flatbed dump truck owners who need a larger receiver opening and whose truck matches the stated frame-width application. Compared with the 1809055, this model lists a 2-1/2-inch receiver and a higher MGTW figure.
Check before buying: Confirm the truck frame width and receiver size. The provided feature details do not specify installation steps or additional vehicle fitments.
GWTAUTO Adjustable Tri-Ball Hitch With Hook
This adjustable hitch fits a 2-inch receiver and combines three ball sizes—1-7/8, 2, and 2-5/16 inches—with a hook. The listing states a 17,000-pound GTW rating for the hitch and a 10,000-pound tension rating for the hook. A built-in screw and iron pad are intended to reduce movement between the mount and receiver.
Best for: A buyer who already has a compatible 2-inch receiver and needs different ball sizes or a hook option. It is an accessory, not a replacement for a dump truck’s frame-mounted hitch plate.
Check before buying: The stated GTW rating is not the same as the capacity of the truck or receiver. Use the lowest applicable rating in the towing system.
Buying Guide: How To Choose A Dump Truck Hitch
Does the truck need a hitch plate or a receiver accessory?
A hitch plate or hitch plate bumper mounts to the truck and provides the towing connection. An adjustable ball mount fits into an existing receiver. If the dump truck lacks a properly installed receiver or pintle plate, a receiver accessory alone will not provide the required mounting point.
How should you match hitch fitment?
Start with the truck make, model, chassis, frame width, and mounting position. The listed Buyers Products plates are specific to certain truck applications or a nominal 34-inch cab-and-chassis frame width. Do not assume that a plate fits just because its towing rating appears sufficient.
Should you choose a receiver or pintle mount?
A receiver-style hitch provides an opening for compatible inserts, while a pintle plate is intended for pintle hook mounting. Some flatbed models support both receiver and pintle options. Choose based on the trailer coupler and towing equipment you use, and verify that the required hook or insert is included.
How do you compare towing ratings?
Check the hitch rating, receiver or pintle component rating, truck rating, and trailer requirements. MGTW and GTW are the terms used in the supplied product details, but the numbers should not be treated as a guarantee that every truck or installation can tow that amount. Follow vehicle and component limits.
What installation details matter?
Review whether the product is bolted, welded, or requires drilling, and confirm that the installer can meet the manufacturer’s mounting requirements. A “little or no fabrication” description does not establish fitment for every truck configuration.
Frequently Asked Questions
What type of hitch is commonly used on a dump truck?
Dump trucks may use a frame-mounted receiver hitch or a pintle mount. The right type depends on the truck’s hitch setup and the trailer connection.
Can I use a 2-inch adjustable hitch on any dump truck?
No. It requires a compatible 2-inch receiver, and the truck, receiver, and hitch must all be suitable for the towing load.
What does MGTW mean on a hitch listing?
MGTW means maximum gross trailer weight in the listed product details. It is a hitch specification, not a substitute for checking the truck and other towing components.
Do flatbed dump trucks need a special hitch?
Some flatbed dump trucks benefit from a hitch plate bumper designed for flatbeds, especially when frame width and rear overhang are relevant. Confirm the truck dimensions and hitch application before selecting one.