Choosing the right heat wrap for a motorcycle exhaust can improve performance, protect nearby components, and extend engine life. The following selections emphasize high heat resistance, durability, and ease of installation, making them suitable for riders who want reliability under varied riding conditions. Each option includes stainless ties for secure application and is compatible with typical exhaust configurations. This guide helps compare fibreglass heat wraps designed for motorcycles, cars, and trucks, so you can pick the best fit for your setup.
| Product | Heat Rating | Length | Ties | |
|---|---|---|---|---|
| SunplusTrade 2″ x 50′ Black Exhaust Heat Wrap Roll | 1400°F direct / 2000°F radiant | 50 ft | 6×12″ stainless steel ties | Fiberglass wrap for tight wraps |
| LEDAUT 2″ x 50′ Titanium Exhaust Heat Wrap Roll | High heat resistance | 50 ft | 16x stainless ties | Soak-before-install; protective wear needed |
| Exhaust Heat Wrap 2”x 16 Ft | 1200°F direct / 2500°F intermittent | 16 ft | 6x stainless ties | Versatile for headers and pipes |
| Exhaust Heat Wrap Roll 2″ x 16′ | 1100°F / 600°C | 16 ft | 6x stainless ties | Low-odor dewaxing note when heated |
| SunplusTrade 2″ x 50′ Black Exhaust Header Wrap | 1400°F direct / 2000°F radiant | 50 ft | 12x stainless ties (per pack) | Two packs option available |
SunplusTrade 2″ x 50′ Black Exhaust Heat Wrap Roll
The SunplusTrade heat wrap is a 2-inch wide fiberglass tape designed for motorcycle exhaust systems. It comes with six 12-inch stainless steel locking ties, enabling secure ends and clean overlaps. Rated to withstand 1400°F direct heat and 2000°F radiant heat, this wrap helps reduce exhaust surface temperatures and shield nearby components from heat exposure. Its abrasion and oil resistance support long-term durability in everyday riding or spirited setups. The roll’s 50-foot length offers multiple wrap opportunities, from headers to downpipes, while the included ties simplify installation and maintenance.
LEDAUT 2″ x 50′ Titanium Exhaust Heat Wrap Roll
LEDAUT’s titanium-finished heat wrap blends strong heat resistance with a distinctive look. This 2″ by 50′ roll is sold as a bundle with 16 stainless steel locking ties, providing ample hardware for securing wrap at multiple junctions. The product notes emphasize soaking the header wrap before installation to minimize fiberglass shedding and itching, plus wearing gloves for protection. The wrap is engineered to resist abrasions, oil spills, and temperature fluctuations, helping shield exhaust components and nearby surfaces without sacrificing wrap integrity during dynamic riding conditions.
Exhaust Heat Wrap 2”x 16 Ft with Stainless Ties
This 2″ x 16′ fiberglass heat wrap is designed for motorcycles, cars, and trucks. It includes six stainless ties and is engineered to withstand up to 1100°F direct heat and 600°C. The wrap helps lower engine bay temperatures and supports performance by reducing heat soak in exhaust components. In addition to performance benefits, the wrap offers wear and oil resistance, enabling longer service life. The package’s compact length makes it suitable for shorter runs, downpipes, or specific pipe segments that require targeted heat management. Some riders note initial odor during dewaxing, which is typical when the wrap is heated for the first time.
Exhaust Heat Wrap Roll, 2″ x 16′ with Ties
This wrap emphasizes high-temperature protection for motorcycles, cars, and trucks, offering up to 1100°F direct heat resistance and 600°C intermittent heat tolerance. The fiberglass construction supports tight wraps for elbows, headers, and curved sections, while the included 11.8-inch ties help secure the wrap without slippage. The product notes highlight heat wrap dewaxing as a normal behavior when first heated, producing a brief odor as residual waxes burn off. The wrap’s wear, oil, and vibration resistance support rugged riding environments and long-term use.
SunplusTrade 2″ x 50′ Black Exhaust Header Wrap
This product is a two-pack option providing two 50-foot rolls with a combined total length suitable for larger exhaust projects or multiple sections of a vehicle. It includes a pack of 12 stainless steel locking ties per roll, enabling secure fastening and neat overlaps. The wrap is designed to withstand up to 1400°F direct heat and 2000°F radiant heat, matching the performance expectations for high-heat exhaust environments. It shares SunplusTrade’s emphasis on abrasion and chemical resistance, helping maintain wrap integrity against oil spills, vibrations, and temperature swings common in performance or daily riding.
Buying Guide: Key Purchase Considerations
- Heat rating and application: Verify direct and radiant heat tolerances to match your exhaust style and riding conditions. Higher ratings provide greater protection for headers and downpipes.
- Material and durability: Fiberglass wraps offer good insulation but can shed fibers during handling. Look for products with corrosion resistance and abrasion resistance, plus UV and chemical resistance as needed.
- Size and quantity: Select width and length based on the pipe diameter and wrap area. Two-inch wraps are common for headers; longer rolls reduce the need for frequent replacements.
- Installation hardware: Stainless steel ties ensure secure, corrosion-resistant fastening. The number of ties should match the wrap length and complexity of the exhaust geometry.
- Preparation and safety: Soaking wraps prior to installation reduces fraying and makes wrapping easier. Wear gloves and eye protection; some wraps may shed fibers during handling.
- Odor and curing: Some wraps emit a temporary odor during the first heating cycle due to dewaxing. This is normal and should subside after a short run.
- Style and aesthetics: Some wraps have a metallic or carbon-like appearance (e.g., titanium or black finishes) that can complement aftermarket exhaust visuals while maintaining performance.
- Maintenance and replacement: Inspect wraps for wear, cracks, or loosening ties. Replace affected sections to maintain heat management and protection.
- Multi-purpose use: While designed for motorcycles, many wraps are suitable for automotive exhausts and other high-temperature pipes, offering versatility across projects.