The best floor jack for a lifted truck needs enough lifting height to reach the truck’s approved lift point and raise it safely. The ROAD DAWG is the strongest match here for extra-high reach, while the BIG RED offers a useful extended saddle neck and the AUTOWN provides a 20.9-inch maximum lift. Compare the jack’s lift range, capacity, and your truck’s clearance before buying; a jack that cannot reach the frame is not suitable, regardless of its weight rating.
| Jack | Listed capacity | Maximum lift | Best suited for |
|---|---|---|---|
| ROAD DAWG | 3 tons | 30.12 inches | Buyers needing the greatest listed reach |
| BIG RED | 3 tons | 20.875 inches | Trucks and SUVs needing an extended saddle neck |
| AUTOWN | 3 tons | 20.9 inches | Pickups and full-size SUVs |
| Maxority 5-Ton | 5 tons | Not specified | Buyers prioritizing listed capacity |
| Powerbuilt Unijack | 3,000 pounds per listed features | 21 inches | Truck owners seeking a jack-and-stand unit |
ROAD DAWG 3-Ton High-Reach Floor Jack
Best for: Lifted-truck owners who need more reach than the other listed floor jacks provide. Its stated lift range runs from 3.86 to 30.12 inches, giving it the highest maximum height in this group. The 3-ton, 6,600-pound capacity is listed for light-duty cars, SUVs, and off-road trucks.
The dual-piston pump is described as providing faster raising action, and the rear casters swivel for positioning. Its high and low profile range may also suit households that service more than one vehicle type.
Limitation: The 3-ton capacity is not appropriate for every truck or every lifting point. Check your truck’s weight distribution and manufacturer-approved jack points before use.
BIG RED 3-Ton Extended-Saddle Floor Jack
Best for: Buyers who want a jack specifically described as suitable for SUVs and extended-height trucks. Its extra-long saddle neck is designed to save time when lifting higher vehicles, and the stated capacity is 3 tons, or 6,000 pounds.
The listed lifting range is 5-7/8 to 20-7/8 inches. Two large steel casters and two 360-degree swivel casters support maneuverability, while the 24.5-inch handle is specified in the product details. Choose this model if your truck’s required lift height fits within that range.
Limitation: Its maximum height is substantially lower than the ROAD DAWG’s listed 30.12 inches, so it may not reach some lifted trucks’ lifting points.
AUTOWN 3-Ton High-Clearance Floor Jack
Best for: Pickup, full-size SUV, crossover, and van owners whose measured clearance and needed lift fit a 7.1-to-20.9-inch range. The product lists a 6,600-pound capacity and alloy-steel construction.
Its rapid-lift hydraulic system is described as reaching height with fewer initial pumps. This makes it a potential choice for garage users who want a relatively high maximum lift without stepping up to the ROAD DAWG’s longer reach. The manufacturer advises measuring the vehicle’s frame clearance, especially for sedans.
Limitation: The 20.9-inch maximum may not be enough for a truck with a high frame or lift point. Confirm the required height before choosing it.
Maxority 5-Ton Heavy-Duty Floor Jack
Best for: Buyers who prioritize a higher listed capacity. The product claims a 5-ton, 11,000-pound rating and describes the jack as suitable for cars, trucks, and SUVs. Its dual-piston quick-lift system and extra-long handle are listed as features intended to reduce pumping effort.
Consider this model only after verifying that its actual lifting range and saddle height match your truck. The supplied product details do not state specific minimum or maximum lift heights, which are essential when shopping for a lifted vehicle.
Limitation: Without a stated lift range in the provided specifications, it is not possible to confirm whether this jack can reach a particular lifted truck’s frame.
Powerbuilt 3-Ton Unijack And Stand
Best for: Truck and SUV owners who value a combined lifting-and-holding design. This unit combines a bottle jack and jack stand, with a built-in ratcheting safety bar that locks in the raised position. The listed lift range is 11 to 21 inches.
The product description identifies pickups, SUVs, vans, and Jeeps as intended vehicle types. It can be a practical alternative to a wheeled trolley jack when the truck’s approved lifting point and required height suit its design.
Limitation: The listed features state a 3,000-pound capacity, despite the product title saying 3 ton and 6,000 pounds. Resolve this discrepancy with the manufacturer before relying on it for a truck.
Buying Guide: How To Choose A Floor Jack For A Lifted Truck
How much lifting height do you need?
Measure the distance from the floor to the truck’s approved lifting point, then determine how high the vehicle must rise for the task. Compare those measurements with the jack’s minimum and maximum lift heights. A tall maximum alone does not guarantee that the jack can fit under the truck at its starting height. For a lifted truck, a higher-reach model such as the ROAD DAWG may be a better match, but measurement is still necessary.
What capacity should the jack have?
Do not choose a jack by the truck’s total curb weight alone. Check the vehicle manual and consider the load at the lifting point. The products listed range from 3-ton ratings to a claimed 5-ton rating, but capacity does not replace the need for an appropriate lift range or approved jack points. Verify conflicting capacity details before purchase.
Do you need a floor jack or a jack-and-stand combination?
A trolley-style floor jack rolls into position on casters and may be easier to maneuver around a garage. A combination unit like the Powerbuilt includes a locking support feature, but its capacity listing needs clarification. Never work under a vehicle supported only by a hydraulic jack; use properly rated support equipment and follow the vehicle and equipment instructions.
Frequently Asked Questions
What is the best floor jack for a lifted truck in this list?
The ROAD DAWG has the highest stated maximum lift, at 30.12 inches. It is the first option to compare when a truck needs extra reach, subject to capacity and lift-point checks.
Is a 3-ton floor jack enough for a lifted pickup?
It may be enough for some lifting situations, but suitability depends on the load at the lifting point and the manufacturer’s requirements. Confirm the truck’s specifications before use.
Can I use a jack with a 21-inch maximum lift on any lifted truck?
No. A 21-inch maximum may not reach a high frame or lift point. Measure the required height and compare it with the jack’s full range.
Should I use a floor jack alone while working under a truck?
No. A hydraulic jack is for lifting, not a substitute for appropriately rated support stands. Follow the vehicle and equipment instructions before working beneath a vehicle.