If you are searching for an enclosed trailer lift gate, note that the products below are spring-assisted systems for open utility trailer tailgates, not powered lift gates for enclosed trailers. They may suit a compatible open trailer ramp; check the maker’s stated rail and gate dimensions before buying. GORILLA-LIFT is the established option for heavy-duty gates, VEVOR states a 180-pound capacity, and Gledewen lists a 400-pound maximum. Buyers with an enclosed trailer should verify that a product’s mounting design fits their trailer before ordering.
| Product | Best suited for | Fit or capacity detail |
|---|---|---|
| GORILLA-LIFT | Heavy-duty utility gates | Capacity not stated |
| VIVBOO | Frequent outdoor use | 12–24-inch rails; 4–6-foot ramp |
| JY PERFORMANCE | Common open utility trailer dimensions | 12–24-inch rails; 4–6-foot gate |
| VEVOR | Buyers needing a stated load limit | Up to 180 pounds |
| Gledewen | Buyers needing a higher stated limit | Up to 400 pounds |
GORILLA-LIFT Two-Sided Tailgate Lift Assist
Best for: Owners of heavy-duty open utility trailers who want a two-sided assist. GORILLA-LIFT says the system helps heavy gates glide up and down with minimal effort. It is selected for its stated focus on commercial-use gates and reducing uneven strain that can contribute to hinge damage or gate warping.
Consider: The provided product details do not specify compatible rail or gate dimensions, or a maximum load. Confirm fit and capacity with the product information before purchasing. This is a mechanical tailgate assist, not a powered enclosed-trailer lift gate.
VIVBOO Dual-Side Trailer Lift Assist
Best for: Owners of open utility trailers with 12–24-inch side rails and a 4–6-foot ramp, especially for frequent farm, landscaping, or hauling use. The dual-spring layout is intended to balance support across both sides, while the enclosed construction helps distribute pressure. A galvanized base and painted outer layer are described as rust- and corrosion-resistant.
Consider: The listed details do not give a maximum gate weight. Check the product’s current fit and load instructions, particularly if your ramp is unusually heavy or your trailer is enclosed.
JY PERFORMANCE Two-Sided Ramp Assist
Best for: Buyers whose open utility trailer has 12–24-inch side rails and a 4–6-foot-tall tailgate or ramp. Its two-sided design is intended to reduce uneven stress and wear. It is selected for its clearly stated dimensions and straightforward comparison with common open-trailer measurements.
Consider: Drilling is required for installation. The provided product details do not specify a maximum supported gate weight, so verify suitability for your ramp before installation.
VEVOR Lift Assist With 180-Pound Limit
Best for: Buyers who want a stated load limit and dimensional fit range. VEVOR lists a maximum capacity of 180 pounds, side rails from 10 to 24 inches, and gates or ramps from 4 to 6 feet tall. The product description also specifies a spring, a 1.47-meter extension cable, carbon-steel square tubes, and a powder-coated finish.
Consider: The 180-pound maximum is a key limit, not a suggested estimate. Confirm the actual ramp weight and fit; do not assume this assist suits a heavier gate or enclosed-trailer configuration.
Gledewen Lift Assist With 400-Pound Limit
Best for: Owners of compatible open utility trailers who need a product with a higher stated maximum capacity. Gledewen lists side rails 12–24 inches above the bed, ramps 4–6 feet tall, and a maximum gate weight of 400 pounds. Its description says the system is fully enclosed and designed for one-hand gate operation after installation.
Consider: Do not use the stated 400-pound limit as proof of fit for every trailer. Confirm mounting geometry and installation requirements, particularly when considering an enclosed trailer rather than an open utility trailer.
Buying Guide: How To Choose A Trailer Lift Assist
Do you need a powered lift gate or a spring assist?
A lift assist uses springs or a similar mechanical system to reduce the effort needed to move a compatible tailgate. It does not provide powered loading or unloading. If you mean a powered lift gate for an enclosed cargo trailer, these products do not claim to provide that function. Check the equipment type before comparing models.
Will it fit your trailer and ramp?
Measure the side rails and the height of the gate or ramp, then compare those measurements with the product’s stated range. Several options here specify open utility trailer dimensions; that does not establish compatibility with enclosed trailer doors, walls, or frames. Check mounting instructions and clearances before drilling or attaching hardware.
How should you compare capacity and construction?
Use only a listed capacity as a firm comparison point: VEVOR states 180 pounds, while Gledewen states 400 pounds. Other entries do not provide a maximum in the supplied details. Compare spring arrangement, two-sided support, cable design, and corrosion protection only where the product description specifies them. Never infer a safe load from appearance alone.
What should you know about installation?
Installation needs vary. JY PERFORMANCE explicitly says drilling is required. For any model, review the mounting directions and make sure the trailer structure can accept the installation. A lift assist reduces effort but does not remove the need to control the ramp safely or inspect the gate, hinges, and hardware.
Frequently Asked Questions
Are these products enclosed trailer lift gates?
No. They are described as lift assists for open utility trailer tailgates or ramps. They are not listed as powered enclosed-trailer lift gates.
Which option lists the highest capacity?
Gledewen lists a maximum tailgate or ramp weight of 400 pounds. Confirm that the product fits your trailer and follow its instructions.
Which product states a 180-pound maximum?
VEVOR lists a maximum load capacity of 180 pounds, along with rail and ramp-height ranges.
Do these systems eliminate all lifting?
The descriptions say they reduce the effort required to raise and lower compatible gates. They do not establish that every gate becomes weightless or requires no control.
Can I install one without drilling?
JY PERFORMANCE states that drilling is required. Installation requirements for other options should be checked in their product instructions.