If you are searching for a double-axle pickup truck, note that these listings are not complete trucks or tandem-axle conversion kits. They include two rear axle shafts for select Toyota Tundras, a dropped front axle for certain classic Chevy/GMC pickups, a hand-truck axle kit, and jack stands for vehicle support. The Fexhull and munirater shafts are the most relevant options for Tundra axle replacement; the Speedway Motors part is for a classic-truck front-end modification.
| Product | Best For | Key Detail |
|---|---|---|
| Fexhull rear axle shaft | Left-side Tundra replacement | Specified 2000–2006 fitments |
| munirater rear axle shaft | Right-side Tundra replacement | Pre-pressed; steel construction |
| Speedway Motors dropped axle | Classic Chevy/GMC front-end modification | Three-inch drop |
| Magliner axle kit | Magliner hand-truck repair | For 10-inch wheels |
| YATOINTO jack stands | Supporting a vehicle during garage work | Adjustable height and two locking features |
Fexhull Tundra Rear Driver-Side Axle Shaft
Best for: Owners replacing the rear driver-side axle shaft on a compatible Toyota Tundra. This assembly is listed for 2000–2002 Tundras with four-wheel ABS and for specified 2003–2006 Standard Cab and Extended Cab models, excluding Double Cab.
The listed replacement numbers include 926-147, 4231134040, 4704435170, and 4704435180. It is selected because its fitment details and rear-left position are stated clearly, helping buyers compare it with the part being replaced.
Check before ordering: Fitment varies by year, cab, and ABS configuration. Confirm the vehicle identification number and part number; do not assume it fits every Tundra in the listed years.
munirater Tundra Rear Right Axle Shaft
Best for: Buyers seeking a rear passenger-side shaft for specified Toyota Tundra models. The listing identifies 2000–2002 four-wheel ABS applications and 2003–2006 Standard Cab applications, excluding Double Cab.
This pre-pressed axle shaft is made of steel, which the listing describes as resistant to deformation and damage. Its right-side position makes it a useful counterpart to a left-side replacement, but the two shafts should not be treated as interchangeable.
Check before ordering: The stated replacement number is 926-148. Verify the truck’s cab configuration, ABS setup, and original part number to avoid ordering a shaft for the wrong side or application.
Speedway Motors Classic Pickup Dropped Axle
Best for: A project involving a compatible 1947–1954 Chevy or GMC half-ton pickup. This front axle is designed to provide a three-inch drop; it is not a rear axle or a tandem-axle conversion component.
The center section uses two-inch DOM tubing, and the ends are CNC-milled solid steel. The axle measures 50.5 inches kingpin-center to kingpin-center and accepts a 1.75-inch-wide spring. Its listed spring-pad center spacing is 26.75 inches.
Check before ordering: Confirm the truck’s year, axle dimensions, spring width, and spring-pad spacing. Do not choose it solely because the vehicle is described as a pickup.
Magliner Axle Kit for 10-Inch Wheels
Best for: Repairing a compatible Magliner hand truck, not a pickup truck. The kit is listed for Magliner hand trucks with 10-inch wheels and includes an axle, two cotter pins, and two roll pins.
The product description highlights a silver finish and assembly components intended to support installation. It is included as an axle-related item in the supplied selection, but it is not suitable as a vehicle axle replacement.
Check before ordering: Confirm that the hand truck uses 10-inch wheels and is compatible with this kit. Avoid this product if you need a pickup-truck axle part.
YATOINTO Adjustable Jack Stands
Best for: Buyers who need a pair of adjustable stands for garage or DIY vehicle work. The listing describes a 12.25-to-16.87-inch adjustment range, a 3-ton capacity per stand, a wide base, and a ratchet lock plus removable safety pin.
These stands may help support a vehicle during maintenance, but they are not axle components and do not create or support a double-axle configuration by themselves. Follow the vehicle and stand instructions when positioning support equipment.
Check before ordering: Confirm the height range and rated capacity suit the job. Never rely on a jack alone to support a vehicle while working underneath it.
Buying Guide: How to Choose the Right Axle-Related Part
Do you mean a tandem rear axle or a replacement axle shaft?
A tandem-axle pickup has two rear axles. An axle shaft is a component within a vehicle’s axle assembly. These are different things: none of the listed products is a complete tandem-axle pickup or a conversion kit. If you want a tandem setup, look for a vehicle or professionally engineered conversion parts specifically described for that purpose.
How should you confirm pickup fitment?
Match the part to the truck’s year, make, model, cab style, axle position, and relevant configuration such as ABS. Compare the original equipment or interchange number with the listing. For the Tundra shafts, side matters: Fexhull specifies rear driver side, while munirater specifies rear passenger side.
What should you compare on a dropped axle?
Check the intended model years and measurements, including kingpin spacing, spring width, and spring-pad spacing. A front dropped axle changes the front-end setup; it is not a substitute for a rear axle shaft or a tandem-axle kit.
When are support stands relevant?
Jack stands are garage equipment, not replacement parts. Compare their capacity and height range with the vehicle and work area, and use them according to their instructions. The listed YATOINTO pair specifies a 3-ton capacity per stand and a double-locking arrangement.
Frequently Asked Questions
Are these products for a double-axle pickup truck?
No. The listings do not include a complete double-axle truck or a tandem-axle conversion kit. Two products are replacement axle shafts for specific Tundras; another is a classic pickup front axle.
Can the Fexhull and munirater shafts be used on the same side?
No. Fexhull is listed for the rear driver side, and munirater is listed for the rear passenger side. Confirm the required position before ordering.
Does the Speedway Motors axle fit a modern pickup?
The listing describes a dropped axle for compatible classic Chevy/GMC half-ton pickups from 1947–1954. It does not establish fitment for modern trucks.
Is the Magliner kit a pickup-truck axle?
No. It is an axle kit for Magliner hand trucks with 10-inch wheels.
What is the most important step before ordering an axle part?
Verify the exact vehicle fitment and part number, including axle side and configuration. Contact the seller with the vehicle identification number if the listing’s fitment details do not resolve uncertainty.