The best B16 valve cover hardware depends on whether you need replacement studs, low-profile washers, or a complete sealing kit. Bevinsee is best for a 16-piece washer-and-seal kit, while Lanphitus offers a set of outer mounting studs for listed B-series engines. DEWHEL and X AUTOHAUX suit buyers seeking aluminum dress-up washers; RemTune is a focused option for the 90014-PR3-000 stud bolt. Confirm your engine and hardware type before ordering.
| Product | Best For | What It Includes or Specifies |
|---|---|---|
| Bevinsee 16-Piece Kit | Valve cover sealing and appearance | Billet aluminum washers, nuts, and seals |
| Lanphitus 8-Piece Stud Set | Outer mounting stud replacement | Short and long studs; listed B-series applications |
| DEWHEL Low-Profile Hardware | Low-profile VTEC valve covers | Aluminum washer hardware |
| X AUTOHAUX Washer Kit | Specified Honda B-series applications | Aluminum alloy washers and bolts |
| RemTune Stud Bolts | Part-number-based replacement | Four 90014-PR3-000 bolts |
Bevinsee 16-Piece Washer And Seal Kit
Best for: Buyers replacing valve cover washers and seals as a set while adding a finished look to the engine bay. The listed kit includes 16 pieces and uses precision-machined 6061-T6 billet aluminum, a hard-anodized surface, and Viton seals.
It was selected because its features address both hardware appearance and sealing. Bevinsee describes the seals as intended to help contain oil. The product data does not specify an exact B16 engine or vehicle fitment list, so verify that the kit matches your valve cover before ordering. Avoid treating it as a replacement for mounting studs if studs are the parts you need.
Lanphitus Eight-Piece Outer Stud Set
Best for: Owners who need outer valve cover mounting studs and want a set containing short and long bolts. The listing identifies part numbers 90014-PR3-000 and 90012-PM7-000 and names applications including B16A, B16A1, B16A2, B16A3, B17A1, B18C, B18C1, B18C5, and B18C6.
This set was selected for its clearly stated B-series engine coverage and two stud lengths. Check the part numbers and the required quantity for your specific engine before buying. It is a stud set, not a 16-piece washer-and-seal kit, so choose another product if you are refreshing all the sealing hardware.
DEWHEL Low-Profile VTEC Washers
Best for: Buyers with a compatible low-profile aluminum valve cover who want silver washer hardware. DEWHEL lists VTEC applications including B16A2, B16A3, B17A1, B18C1, and B18C5, and describes the product as a low-profile valve cover washer.
It was selected for shoppers prioritizing a low-profile appearance and an explicit set of B-series VTEC engine codes. The listing does not describe a full seal-and-nut kit. Confirm whether your valve cover needs washers alone or additional hardware, and avoid choosing this option if your engine or cover is outside the stated fitment.
X AUTOHAUX Blue B-Series Washer Kit
Best for: Buyers seeking blue aluminum alloy valve cover washers and bolts for a specifically listed Honda B-series application. Fitment details name B16A2, B16A3, B17A1, B18C1, and B18C5, as well as selected Integra, Civic Si, and del Sol models.
The stated vehicle and engine list makes this a comparison-friendly choice for owners who can match their application to the listing. Its aluminum alloy construction is presented as a durability and appearance feature. The supplied information does not identify a seal material or specify that it is a complete sealing kit, so check the contents if seals are part of your repair.
RemTune 90014-PR3-000 Stud Bolts
Best for: Buyers matching a replacement directly to part number 90014-PR3-000. RemTune lists four B-series valve cover stud bolts and identifies them for B16 and B18C VTEC cam cap applications.
This product was selected for shoppers who already know the required part number and need a small, focused set rather than decorative washers. The listing states “Off Road Use Only,” which is an important limitation to consider. Verify the part number and intended use for your vehicle before purchasing; the product information does not provide a broader fitment chart.
Buying Guide: How To Choose B16 Valve Cover Hardware
Do you need studs, bolts, washers, or seals?
Identify the missing or worn component first. Studs and bolts mount the cover, while washers and seals serve different roles in the hardware assembly. A 16-piece washer-and-seal kit is not interchangeable with a set of mounting studs. Check whether the product listing describes the exact pieces needed for your repair.
How can you check B16 fitment?
Compare the engine code, vehicle year and model, and any part number printed on the original hardware. B-series labels alone may not establish an exact fit. The product listings name different applications: for example, DEWHEL and X AUTOHAUX specify selected B-series VTEC codes, while RemTune calls out part number 90014-PR3-000. When details do not match, confirm fitment before ordering.
Should you prioritize sealing or appearance?
For a sealing-focused refresh, look for a kit that explicitly includes seals and identifies its seal material. For a visual update, compare washer profile, material, and listed color. Aluminum dress-up hardware may not include every seal or stud required, so assess the contents against your repair needs rather than choosing by appearance alone.
When does a multi-piece stud set make sense?
A set with short and long studs may be useful when replacing several outer mounting points, but the quantity and lengths must match the engine. Check the included count and part numbers. If you need only one specified bolt type, a smaller part-number-based set may be a closer match.
Frequently Asked Questions
Are all B16 valve cover bolts interchangeable?
No. Confirm the engine variant, hardware position, dimensions or part number, and valve cover configuration before selecting a replacement.
Do valve cover washer kits always include seals?
No. Check the listing’s included components. The Bevinsee kit described here specifies seals, while the DEWHEL listing focuses on low-profile washers.
What does 90014-PR3-000 identify?
It is the part number specified by the RemTune listing for its four B-series valve cover stud bolts. Match it to your required hardware before ordering.
Can I use decorative washers to replace mounting studs?
No. Washers and studs are different components. Choose a product that explicitly includes the part you need.