No listed product is confirmed as a 22RE throttle body coolant hose. The JDMSPEED listing specifies a 22RE-related air intake hose, not a coolant hose; the other coolant-hose listings name different vehicles. Use the comparison below to identify what each product actually fits, and verify your Toyota’s part number and hose routing before ordering. For a 22RE, prioritize a hose listed for your exact year and engine rather than assuming a throttle-body hose for another vehicle will fit.
| Product | Listed application | Fitment note |
|---|---|---|
| JDMSPEED intake hose | 1989–1995 Toyota 4Runner/Pickup, 2.4L 22RE | Air intake part, not coolant hose |
| JOIUYOLJ silicone hose | 1999–2004 Nissan Frontier/Xterra, 3.3L | Not listed for Toyota 22RE |
| GaeaAuto heater pipes | Chevrolet Cruze and Sonic | Not listed for Toyota 22RE |
| Dayco coolant hose | 1999–2007 Chevrolet Silverado 1500 | Not listed for Toyota 22RE |
| Gates heater hose | 1999–2012 GMC Sierra 1500 | Not listed for Toyota 22RE |
JDMSPEED 22RE Air Intake Hose
This is the only listing in the supplied selection that names Toyota 22RE applications. However, it is an air intake hose with replacement part numbers 22231-35030, 2223135030, 696-014, and 696014. It is not identified as a coolant hose, so it should not be purchased as a substitute for a coolant line.
Best for: Owners of a listed 1989–1995 Toyota 4Runner or Pickup with a 2.4L 22RE who need the specified intake hose. It is included because its stated engine application is relevant to 22RE owners. Limitation: The listing does not establish fitment for a throttle body coolant hose.
JOIUYOLJ Silicone Coolant Hose
The listing describes a three-layer silicone throttle body coolant hose with a clamp for 1999–2004 Nissan Frontier and Xterra vehicles with a 3.3L engine. It specifies silicone and nylon fabric construction, an operating temperature range of 76°F to 500°F, working pressure of 85 PSI, and burst pressure of 245 PSI.
Best for: A buyer seeking the stated Nissan application and hose type. It is more directly described as a coolant throttle-body hose than the 22RE intake listing. Limitation: The listed Nissan fitment does not confirm compatibility with a Toyota 22RE.
GaeaAuto Throttle Body Heater Pipes
GaeaAuto lists inlet and outlet throttle body heater pipes for 2011–2015 Chevrolet Cruze, 2016 Cruze Limited, and 2012–2018 Chevrolet Sonic. The listing provides replacement numbers including 25192905, 55354563, 5826487, 5826481, and 55569809, and says installation accessories are included.
Best for: Buyers matching the named Chevrolet vehicle and replacement number. The product is selected as a clearly identified throttle body heater-pipe assembly. Limitation: Its listed applications are Chevrolet models, not Toyota 22RE vehicles.
Dayco Silverado Coolant Hose
This Dayco engine coolant hose is described as running from the throttle body to the engine. Its stated application is a 1999–2007 Chevrolet Silverado 1500 with a 4.8L, 5.3L, or 6.0L V8. The listing identifies it as a genuine Dayco part and says original packaging and hardware are included.
Best for: Silverado owners whose year, engine, and hose routing match the listing. It is useful as a clearly described throttle-body-to-engine coolant hose for comparison. Limitation: The application information does not support using it on a 22RE.
Gates Sierra Heater Hose
This Gates HVAC heater hose is listed for the radiator-to-throttle-body route on 1999–2012 GMC Sierra 1500 models with a 4.8L, 5.3L, or 6.0L V8. The supplied details identify it as a genuine Gates part and state that original packaging and hardware are included.
Best for: A Sierra owner matching the listed year and engine who needs this specific hose route. Limitation: It is not listed for Toyota trucks or 22RE engines, so the product description does not establish 22RE fitment.
Buying Guide: How to Choose a 22RE Coolant Hose
How can you confirm the correct hose?
Start with the vehicle’s model year, model, engine, and the hose’s exact location. Compare the old hose’s shape, end connections, and routing with the replacement description. Check the original part number when available. A listing that mentions a throttle body but names a different make or engine is not proof of interchangeability.
Is an air intake hose interchangeable with a coolant hose?
No. The JDMSPEED listing identifies an air intake hose. The product information does not say it carries coolant. Match the part’s function as well as its shape; do not use an intake component as a coolant-line replacement based only on its connection area.
What if a listing does not name a 22RE?
Ask the seller or parts supplier to confirm fitment using your vehicle details and the original part number before ordering. The products above with Nissan, Chevrolet, or GMC applications are not confirmed 22RE options by the supplied descriptions.
Should you compare material and pressure details?
Yes, but only after confirming fitment. The JOIUYOLJ listing provides silicone construction and temperature and pressure figures for its stated Nissan application. Those specifications do not independently prove that the hose fits a Toyota 22RE.
FAQ
Which listed product is confirmed as a 22RE coolant hose?
None. The JDMSPEED listing names a 22RE application but describes an air intake hose, while the coolant-hose listings name other vehicles.
Does the JDMSPEED hose fit a 22RE throttle body coolant connection?
The provided product details do not say that it is a coolant hose. They identify it as an air intake hose, so coolant-hose fitment is not established.
Can a Nissan or Chevrolet throttle body hose fit a Toyota 22RE?
The supplied listings do not confirm that. Verify the part number and application with a qualified parts source before buying.
What information should I have before ordering?
Have the vehicle year and model, engine designation, hose location, and original part number if available. These details help distinguish an intake hose from a coolant hose and narrow the correct application.