The best 2-inch receiver ball mount depends on your trailer’s weight, coupler size, and required hitch height. The CURT 45036 is a ready-to-use choice rated for 7,500 pounds, while the OMT model offers an 8,000-pound rating and reversible drop-or-rise positioning. For a mount without a preinstalled ball, the CURT 45260 lets you choose a compatible ball separately. Compare the ratings and included hardware below, then confirm that every towing component is rated for your setup.
| Product | Best for | Key detail |
|---|---|---|
| CURT 45036 | Ready-to-tow setup | Pre-attached 2-inch ball; 7,500-pound GTW rating |
| AC-DK Ball Mount | Included pin and clip | 2-inch ball; 7,500-pound GTW rating |
| CURT 45260 | Choosing a separate ball | 2-inch drop and 3/4-inch rise |
| METOWARE Ball Mount | Moderate towing capacity | 6,000-pound GTW rating |
| OMT Ball Mount | Higher listed capacity | 8,000-pound GTW rating; reversible |
CURT 45036 Loaded Ball Mount
Best for: Buyers who want a standard 2-inch ball mount that arrives with the ball and hitch pin included. Its 2-inch-by-2-inch shank fits a standard 2-inch receiver, and the mount has a 2-inch drop, 2-inch ball, 5/8-inch pin hole, and 7-1/2-inch overall length.
The listed capacity is 7,500 pounds gross trailer weight (GTW) and 750 pounds tongue weight. It was selected as a straightforward ready-to-use option because the ball is pre-attached and the product includes a pin. Confirm the ball is suitable for the trailer coupler before towing. The listing notes that capacity may change if the ball is removed.
AC-DK 2-Inch Drop Ball Mount
Best for: Buyers seeking a complete mount kit with a ball, pin, and safety clip. It is rated for 7,500 pounds GTW and 750 pounds tongue weight, and its shank is designed for a standard 2-inch receiver. The listed ball size is 2 inches.
The black powder-coated mount body and chrome-plated ball are specified as corrosion-resistant finishes. This model was selected for its included fastening hardware and stated towing capacity. The product instructions say to tighten the ball with tools until the anti-loosening nut is fully seated, so it is not simply a hand-tighten installation.
CURT 45260 Class III Ball Mount
Best for: Buyers who want to select a trailer ball separately. This steel mount has a 2-inch-by-2-inch shank, a 2-inch drop, and a 3/4-inch rise when positioned for rise. Its 7,500-pound GTW and 750-pound tongue-weight ratings are subject to the lowest-rated towing component in the setup.
Choose this model if you already have a compatible ball or want to match the ball to your trailer coupler. The mount has a 1-inch hole for a ball with a 1-inch-diameter shank, and the trailer ball is sold separately. That means it is not ready to tow until a suitable ball and the required hardware are installed.
METOWARE 2-Inch Drop Ball Mount
Best for: Buyers whose towing needs fit a 6,000-pound GTW and 600-pound tongue-weight rating. This mount has a 2-inch-by-2-inch shank, a 2-inch drop, and a 0.75-inch rise. The listing also specifies a pre-attached 2-inch ball and an included hitch pin.
It was selected as a ready-to-use option with a lower stated capacity than the 7,500- and 8,000-pound models in this comparison. Check your loaded trailer weight and tongue weight against the ratings before choosing it. Avoid this mount if either weight exceeds its listed limit or if your trailer requires a different ball size.
OMT Reversible 2-Inch Ball Mount
Best for: Buyers who need a higher listed GTW rating and the option to adjust hitch height by reversing the mount. The listing specifies an 8,000-pound GTW capacity, a 2-inch receiver size, and a 2-inch ball. It can be positioned for a 2-inch drop or a 3/4-inch rise.
This model was selected for its reversible configuration, which can help match different trailer heights. Measure the vehicle and trailer connection before deciding which orientation provides a level setup. The provided features do not state a tongue-weight rating or confirm which installation hardware is included, so check those details before purchase.
Buying Guide: How To Choose A 2-Inch Receiver Ball Mount
What weight rating do you need?
Check the loaded trailer’s gross weight and tongue weight, then compare them with the mount’s stated limits. The towing setup is limited by its lowest-rated component, so also verify the receiver, vehicle, ball, and other connected equipment. Do not treat the mount’s GTW rating as the towing capacity of the vehicle.
Should you buy a loaded mount or a mount without a ball?
A loaded mount includes a ball, which can reduce the number of components you need to source. Confirm that the ball diameter matches the trailer coupler. A mount such as the CURT 45260 is better for buyers who want to choose a ball separately, but its listed ball-shank hole size must match the ball being installed.
How do drop and rise affect fit?
Measure the height difference between the receiver and the trailer coupler when both are level. A drop or rise can help align the trailer with the towing vehicle. A reversible mount offers two orientations, but the listed measurements do not guarantee the correct fit for every vehicle and trailer combination.
What hardware should you check?
Confirm whether the mount includes a hitch pin, safety clip, and ball. Check the pin-hole size and follow the product’s ball-installation instructions. Included hardware varies, so do not assume every ball mount in this comparison comes with the same components.
Frequently Asked Questions
What does a 2-inch receiver ball mount fit?
It is designed for a receiver with a 2-inch-by-2-inch opening. The trailer ball must separately match the trailer coupler.
Does every 2-inch receiver ball mount use a 2-inch ball?
No. Receiver size describes the shank, not the ball. Check the ball diameter listed for the product and the size required by the trailer coupler.
Is a 7,500-pound GTW rating enough for my trailer?
It is enough only if the loaded trailer weight stays within the mount’s rating and every other towing component is also rated for the load. Check tongue weight as well.
Can I use a drop mount in the rise position?
Only if the product is designed to be reversed for rise. The CURT 45260 and OMT model list rise measurements; check the specific mount’s installation details before reversing it.
Are hitch pins included?
Inclusion depends on the product. The CURT 45036, AC-DK, and METOWARE listings specify an included pin; check the individual listing for other models.