The best 12-inch ATV rims depend on your machine’s bolt pattern, required offset, and riding needs. The ITP Delta 12×7 with a 4/156 bolt pattern is a clear option for riders who need that specific fitment; the ITP Delta rear and Sedona steel wheel are 4/110 choices. The WANDA package suits buyers seeking tires and rims together. Confirm your ATV’s specifications before ordering: a 12-inch rim diameter alone does not establish fit.
| Product | Listed size and fitment | Best for |
|---|---|---|
| ITP Delta 12×7 | 4/156 | Buyers needing a 4/156 wheel |
| ITP Delta Black Rear | 12×7, 2+5, 4/110 | Rear replacement with listed fitment |
| Sedona Steel Rear | 12×7, 2+5, 4/110 | Buyers comparing a steel wheel |
| WANDA Tire and Wheel Set | 12-inch rims; 4x110mm PCD | Buyers replacing tires and wheels together |
| ITP Delta Steel Wheel | 12×7; listing says 4/4mm | Buyers who can verify the listing’s fitment |
ITP Delta 12×7 4/156 Black Wheel
Best for: ATV owners whose required bolt pattern is 4/156 and who want a black steel wheel. Its listing identifies a 12×7 size and a 4/156 pattern, making it easier to compare against a machine’s specifications.
ITP describes the wheel as having precision-rolled rims, stamped high-strength centers, and a corrosion-resistant powdercoat finish. D-shaped cutouts are intended to reduce wheel weight. Those construction details make it a relevant choice for utility and off-road replacement needs.
Limitation: The listed bolt pattern is specific. Avoid choosing it based only on the 12-inch diameter; confirm the ATV requires 4/156 and verify other fitment requirements.
ITP Delta Black Rear 12×7 Wheel
Best for: Riders looking for a rear wheel with a listed 12×7 size, 2+5 offset, and 4/110 bolt pattern. This is a more specific comparison option than a rim listing that gives only its diameter.
The Delta design uses D-shaped cutouts, and ITP lists precision-rolled rims with stamped, high-strength centers. The brand describes its Delta wheels as part of a range of factory replacement and specialty wheels for utility 4×4 ATVs.
Limitation: The product is identified as a rear wheel, so confirm that position and the 2+5 offset match your setup. Do not assume it is suitable for every axle or ATV with a 4/110 pattern.
Sedona Steel 12×7 4/110 Rear Wheel
Best for: Buyers comparing a 4/110 steel rear wheel with a stated 2+5 offset. Sedona lists a 1,000-pound load rating and describes the center design as lightweight and strong, which gives shoppers concrete specifications to check against their needs.
The wheel is presented as a value-minded steel option. It may suit an owner prioritizing a straightforward replacement wheel over a complete tire-and-wheel package.
Limitation: The load rating does not confirm vehicle fit. Check the ATV’s wheel specifications and load requirements, and verify that the rear designation and offset are appropriate.
WANDA ATV Tire And Wheel Set
Best for: Buyers who want tires and rims together rather than sourcing each separately. The set lists 25×8-12 front and 25×10-12 rear tires on silver 5+2 rims with a 4x110mm bolt pattern.
WANDA describes the tires as having a deep, widely spaced tread for shedding mud, a smooth-rolling design, and 6-ply-rated nylon construction intended to resist punctures and abrasions. The listed tread is intended for a variety of terrain.
Limitation: This is a tire-and-wheel package, not a rim-only purchase. Confirm that the tire sizes, bolt pattern, and listed offset suit your ATV before selecting the set.
ITP Delta Steel 12×7 Wheel
Best for: Shoppers considering an ITP Delta steel wheel in 12×7 who can independently verify the exact bolt pattern. The listing identifies a machined finish and places the wheel in ITP’s value-minded steel wheel line.
This option is worth comparing when the Delta style and steel construction are priorities. However, the supplied listing describes the fitment as “4/4mm,” which is unclear and should not be treated as a confirmed bolt pattern.
Limitation: Verify the correct bolt pattern, offset, and intended wheel position with the seller or product listing before ordering. Do not rely on this entry’s ambiguous fitment description for a purchase decision.
Buying Guide: How to Choose 12-Inch ATV Rims
Which measurements should I check?
Start with the rim diameter, then check width, bolt pattern, offset, and whether the wheel is intended for the front or rear. In these listings, 12×7 means a 12-inch diameter and 7-inch width; patterns such as 4/110 and 4/156 are different and are not interchangeable. Match each measurement to your ATV’s manual or existing wheel specifications.
How important is offset?
Offset describes how the wheel sits relative to its mounting face. The ITP and Sedona rear listings specify a 2+5 offset, while the WANDA package lists 5+2 rims. Compare the required offset for your ATV and axle position rather than assuming that wheels with the same diameter and bolt pattern will sit the same way.
Should I buy rims alone or a tire-and-wheel set?
Choose a rim-only option if your tires are suitable and you want to retain them. A complete set such as WANDA’s can simplify replacing tires and wheels together, but it also means checking the listed front and rear tire sizes. Confirm that the package’s rim dimensions and bolt pattern suit your vehicle.
Steel or a feature-focused wheel design?
Compare the construction information actually supplied. The Sedona listing provides a steel-wheel description and a 1,000-pound load rating. ITP highlights stamped centers, rolled rims, powdercoat, or Delta cutouts on select listings. Treat those as product details, not substitutes for checking fitment and your machine’s load requirements.
Frequently Asked Questions
Will any 12-inch ATV rim fit my ATV?
No. Diameter is only one measurement. Bolt pattern, width, offset, and wheel position also need to match.
Are 4/110 and 4/156 bolt patterns interchangeable?
No. They identify different bolt patterns. Use the pattern specified for your ATV.
Does the WANDA package include tires?
Yes. It is listed as a tire-and-wheel set with 25×8-12 front and 25×10-12 rear tires.
Can I use the ITP Delta rear wheel on the front?
The listing identifies it as a rear wheel. Confirm intended position and fitment before using it elsewhere.
What should I do about unclear fitment details?
Verify the bolt pattern and other specifications with the seller or manufacturer before ordering. Do not guess based on rim diameter or appearance.