The best 1 1/2-inch ape hangers depend on your Harley model, preferred rise, finish, and wiring needs. The Wsays 14-inch bar is a fitment-rich chrome option; Prewired’s 12-inch bar targets Touring models with Batwing fairings; and its 16-inch model suits select Softail, Dyna, and Sportster bikes. The Aferrizu 12-inch bar is another chrome Touring option. A 1 1/4-inch alternative is included for shoppers comparing nearby sizes, but it is not a 1 1/2-inch bar.
| Handlebar | Rise | Best For |
|---|---|---|
| Wsays Chrome | 14 inches | Multiple Harley model families |
| Prewired Touring | 12 inches | Batwing-fairing Touring models |
| Prewired Softail/Dyna/Sportster | 16 inches | Riders seeking a taller bar |
| Aferrizu Chrome | 12 inches | Specified Touring models |
| TCMT | 14 inches | Shoppers open to 1 1/4-inch bars |
Wsays 14-Inch Chrome Ape Hanger
Best for: Harley owners looking for a 14-inch rise and broad listed fitment across Softail, Sportster, Dyna, Road King, and select Road Glide models. It is selected for its detailed dimensions and stated 1.5-inch bar diameter.
- Steel construction with triple chrome plating.
- 35.5-inch overall width, 8-inch pullback, and 1-inch grip area diameter.
- Pre-drilled wiring holes; the clamp area is listed as 1 inch in diameter.
Note: Confirm the motorcycle’s model year and handlebar clamp requirements before ordering. Its 14-inch rise may also require checking cable and wire reach for your setup.
Prewired 12-Inch Touring Bar
Best for: Owners of listed 1986–2023 Harley Touring models with Batwing fairings who want a black, 1.5-inch-diameter bar with a 12-inch rise. Its specified width is 37.2 inches, with a 7-inch pullback and 1-inch clamp diameter.
The product listing names Electra Glide, Street Glide, Ultra Classic, and Tri-Glide models. The carbon-steel construction and Touring-specific fitment make it a useful choice for buyers narrowing the search by fairing and model family.
Note: Extended brake and clutch cables are required and are not included. The listing excludes 2026-up Street Glide and Electra Glide models.
Prewired 16-Inch Black Handlebar
Best for: Riders with a listed 2007–2013 Softail, Dyna, or Sportster model who want a taller 16-inch rise. This bar has a 1.5-inch diameter, 35-inch total width, 7-inch pullback, and 1-inch clamp area.
Its included CAN-Bus and turn-signal wiring harnesses are intended to simplify installation. Choose this if the model-year fitment and taller rise suit your bike and riding position.
Note: Some models are excluded, including Softail Springer, Fat Boy FLSTF, and Fat Boy Lo FLSTFB. Extended clutch or brake cables may be needed and are not included; the listing says a TBW wire harness is not supplied.
Aferrizu 12-Inch Chrome Touring Bar
Best for: Owners of the specific Touring models listed, including several Street Glide, Ultra Limited, and CVO versions. The 1.5-inch bar diameter, 12-inch rise, chrome plating, and 36.5-inch overall width make it a relevant option for buyers seeking a polished finish.
The listing gives a 17.1-inch center width and a 1-inch clamp-area diameter. Its fitment details are more model-specific than a general Touring fitment statement, so compare the exact year and trim before choosing.
Note: The listed compatibility does not cover every Harley Touring model or year. Verify fitment rather than relying on the broad category name alone.
TCMT 14-Inch 1 1/4-Inch Alternative
Best for: Buyers willing to consider a nearby but smaller 1 1/4-inch bar. It is selected as a size comparison, not as a 1 1/2-inch match. The listing describes a 14-inch rise, iron construction, drilled wiring holes, and a 31.35-inch tip-to-tip width.
The center tapers to 1 inch so standard handlebar controls can fit, according to the product details. Its stated applications include multiple Softail, Sportster, and Dyna models.
Note: The listing says the bar has indents for external wiring and that internal wiring requires manual drilling. Choose a true 1.5-inch option if that diameter is a firm requirement.
Buying Guide: How To Choose 1 1/2-Inch Ape Hangers
Will the handlebar fit your motorcycle?
Start with the exact model, year, and trim—not just “Harley-Davidson” or “Touring.” Compare the product’s fitment list with the motorcycle’s specifications, including the clamp area diameter. These products include different fitment ranges and are not interchangeable based on rise alone.
What rise and pullback should you compare?
Rise affects how high the grips sit, while pullback describes how far the bar comes toward the rider. Compare both measurements with the listed width and your existing setup. A 12-inch rise is lower than a 14- or 16-inch rise, but the best choice depends on the bike and rider.
Do cables or wiring need changes?
Check the installation notes before buying. One selected Touring bar explicitly requires extended brake and clutch cables; another warns that stock cables may not reach. Wiring features also vary: some bars have drilled holes, one has indents for external wiring, and the 16-inch option includes certain harnesses but not a TBW harness.
Does “1 1/2-inch” refer to the right area?
Product listings may give separate measurements for the bar tube, clamp area, and grip area. Confirm each measurement against your motorcycle’s requirements. Do not treat a 1 1/4-inch bar as a 1 1/2-inch option, even when the rise and general style are similar.
Frequently Asked Questions
Are all ape hangers in this list 1 1/2 inches?
No. The TCMT option is 1 1/4 inch and is included only as a nearby-size comparison. The other four selected products list a 1.5-inch bar diameter.
Do taller ape hangers always require longer cables?
Not always, but cable reach must be checked for the specific motorcycle and handlebar setup. Some listings explicitly call for extended cables or warn that stock cables may not reach.
Can I use these bars on any Harley Touring model?
No. Fitment varies by product, model year, and trim. Check the specific compatibility list before ordering.
What measurements should I compare before buying?
Compare rise, overall width, pullback, bar diameter, clamp diameter, and grip area diameter. Also review wiring provisions and cable requirements.